Sawmill and Timber

Sawmills and Sawing => Bandsaw Mills => Topic started by: furu on May 16, 2016, 11:36:08 AM

alt image description alt image description alt image description alt image description alt image description alt image description alt image description alt image description alt image description alt image description alt image description alt image description alt image description alt image description alt image description alt image description
Title: Got a call from a customer
Post by: furu on May 16, 2016, 11:36:08 AM
I have only recently started to saw for others on a limited basis. 
Got a call the other day about doing some work for an individual.  Asked him what he had and the size.
 
Him  "Oh, they are pretty large and real straight"
Me   "about what diameter"
Him  " pretty good size, at least 24 inches in diameter maybe more"

I am thinking this could be a good deal. Big logs somewhat easy cutting so I make an appointment to go and take a look.

First log has enough snake in it that I am thinking how to cut it to minimize the damage.  I tell the customer that it will be a challenge to get good straight lumber and that it will warp most likely as it dries.

Oh yes the largest log's butt measured 13.5 inches inside the bark.

Still worth the time and effort to do it for him.  Now just have to get his and my schedule together.
Title: Re: Got a call from a customer
Post by: Tom the Sawyer on May 16, 2016, 04:54:45 PM
I have found that these types of jobs can lead to better things.  If it is a one-time thing, then hopefully you'll be adequately compensated for your work.  Walk him through what you are doing and why.  Show him what you can recover.  He will appreciate what you are able to do and, the next time, he'll have a better idea what makes a good saw log. 

I would not, under any circumstances, mill his logs without him being there.  That is just a general practice of mine but with low yield logs, he may be surprised by the small amount of lumber, especially if he scaled them himself (not accounting for the loss from sweep or crook), and think that you shorted him.

I now video the majority of my milling appointments.  I use a small dash cam and switch Micro SD cards every 3.5 hours.  It comes in handy for double-checking my counts, tracking my efficiency, etc.
Title: Re: Got a call from a customer
Post by: Kirk Allen on May 16, 2016, 06:49:34 PM
Well I kicked off the summer with a walnut customer today.  Called and said he had a couple real nice walnut logs that have been in the barn for 4 years.  Told him to bring them out and I would take care of getting them into lumber.

Grain truck pulls up hours after the call and by all indications, the whole tree is in the truck.  Butt log, and every branch above it! 

Finished up all of it today and wouldn't you know it, the last log, the butt log, had a nasty rot knot that was filled with everything a squirrel could carry into that hole, including rocks!  ZZZZZZZZING...screech...........stop! 

Yep, toasted a blade on the last log!  Never fails!  If it's walnut, its a magnet for blade eating material!
Title: Re: Got a call from a customer
Post by: bandmiller2 on May 16, 2016, 07:05:55 PM
Most people don't have a clue when it comes to logs and their yields. I tell them I only cut  it I don't create it. I try to explain everything and have them hold one end of a chalk line at one end of the log me on the other then they see what even minor sweep can do. Most turn out to be good folks and repeat customers. Frank C.
Title: Re: Got a call from a customer
Post by: furu on May 16, 2016, 08:08:11 PM
Quote from: Tom the Sawyer on May 16, 2016, 04:54:45 PM

I now video the majority of my milling appointments.  I use a small dash cam and switch Micro SD cards every 3.5 hours.  It comes in handy for double-checking my counts, tracking my efficiency, etc.

Now I would never have thought of that.  That is a great idea.  The things that technology can offer us.
Title: Re: Got a call from a customer
Post by: Post Oakie on August 26, 2016, 09:43:23 AM
When a potential customer contacts me and gives me the "diameter" of a tree, the first thing I do is ask how it was measured.  Like as not, they measured around the tree.  30" diameter is a serious log.  30" circumference isn't.  Good idea on the dash cam.  Could be handy on the way to and from a job, as well.
Title: Re: Got a call from a customer
Post by: red oaks lumber on August 27, 2016, 05:59:28 PM
if i got a dollar every time a customer said "oh there big ,24" diameter veneer" hell i wouldn't need to fire up the saw/ ;D