Sawmill and Timber

Sawmills and Sawing => Mobile Dimension, Swing Mills and other Specialty Mills => Topic started by: Kirk Allen on January 09, 2017, 11:53:14 AM

alt image description alt image description alt image description alt image description alt image description alt image description alt image description alt image description alt image description alt image description alt image description alt image description alt image description alt image description alt image description alt image description
Title: another swinger on the market?
Post by: Kirk Allen on January 09, 2017, 11:53:14 AM
Title: Re: another swinger on the market?
Post by: HaroldCR - AKA Fla.-Deadheader on January 09, 2017, 02:46:13 PM

 Looks like economy model from Carl Petersen and son. Turbo sawmill decal on aluminum track frame.
Title: Re: another swinger on the market?
Post by: Stevem on January 10, 2017, 10:40:11 PM
Looks kind of awkward getting the boards off.  Might be just for the film so the off bearer wasn't in front of the camera. 
Title: Re: another swinger on the market?
Post by: bandmiller2 on January 11, 2017, 02:54:07 PM
Looks expensive, I bet an old Belsaw would give it a run for its money, at a fraction of the price. Frank C.
Title: Re: another swinger on the market?
Post by: HaroldCR - AKA Fla.-Deadheader on January 11, 2017, 07:37:05 PM

 A swinger makes a good 1 man operation if you set things up and saw from the opposite end first. The auto feed is better left to 2 man operation.