Sawmill and Timber

Business and markets => For Sale => Topic started by: dltimbertech on February 28, 2019, 02:11:12 PM

alt image description alt image description alt image description alt image description alt image description alt image description alt image description alt image description alt image description alt image description alt image description alt image description alt image description alt image description alt image description alt image description
Title: D&L 1224 Commercial 180° SwingBlade - $39,995 USD
Post by: dltimbertech on February 28, 2019, 02:11:12 PM
(https://dltimbertech.com/wp-content/uploads/2019/02/12.jpg)
Price: $39,995 USD

The D&L 1224 Commercial 180° SwingBlade with a 46 hp Kubota diesel. This mill model houses hydraulic feed works, set works and a hydraulic swing all controlled from the operator station. We combined the 2 technologies using the robust frame and lift system of the twin saw model with the original D&L 180° SwingBlade. This is a heavy duty mill that is ready for a serious commercial entity.

Portability - D&L Swing Blade is transportable by a vehicle with a standard single axel trailer that is easily removed to allow the mill to be set up at ground level. The D&L Commercial SB1224 can be set up in less than 1.5 hours.

Blade Technology - The unique D&L Six Tooth Carbide Tipped Thin Kerf blade makes accurate and smooth cuts and is second to none in the industry. Sharpening can be done in place and in minutes using the accompanying diamond sharpener. Ideal for both soft and hard woods and in use around the world. Insertable tooth blades also available.

Smart Design - Patterned after our Heavy Duty Twin Saw models we have developed a very heavy duty frame to house a powerful 46 hp diesel using our already proven 180 degree swing technology from our SB models. D&L has made every effort to incorporate use of “off-the-shelf” parts to make repair and replacement quick, easy and affordable.


Specs
Log Diameter: Cuts a 48” diameter log. Cuts a 60” diameter log (optional with the 10ft wide carriage)
Log Length Cut: length 21ft
Track: 12' track sections. Modular track design that bolts right into the trailer
Bunk Systems: 3 Bolt in bunk systems with manual dogging
Feed Works: Hydraulic feed works
Hydraulic Set: Hydraulic set works for both the Vertical and the horizontal setting
Cants: 12 x 24 cants
Swing: 12 inch swing
Swing Degrees: 180 degree swing
Hydraulic Swing: Hydraulic swing on the saw
Trailer: Single axel trailer 15” RUBBER. Trailer is removable from mill frame leaving mill frame on ground level
Construction: All steel construction
Weight: 4500 pounds
Carriage Width: Standard 8ft. Optional carriage width 10ft
Knives: Double riving knives
Saw Diameter: 32' saw diameter, 14 teeth, 17/64' kerf inserted saw
Comes With: Comes with bit wrench, diamond sharpener and jig
Assembly: Sets up in under 1.5 hours
Power Units: 46 hp diesel Kubota
Shoots: Sawdust shoots
Parts: Off the shelf parts


Parts & Additions

Spare 32” inserted saw: $1295.00
Spare Teeth: $5.30
Spare shanks: $14.95
Slabber: $2595.00
Slab Sanding Disc: $695.00
Planer Blade: $995.00
D&L Router Bit: $995.00

Brochure (https://dltimbertech.com/dl-1224-commercial-180-swing-blade/) - Website (https://dltimbertech.com/products/)
Title: Re: D&L 1224 Commercial 180° SwingBlade - $39,995 USD
Post by: bandmiller2 on February 28, 2019, 05:18:39 PM
DL Tech, does your 32" saw require tensioning and are the bits and shanks a standard item.?? thanks Frank C.
Title: Re: D&L 1224 Commercial 180° SwingBlade - $39,995 USD
Post by: dltimbertech on March 12, 2019, 10:37:39 AM
The saws only need tensioning when the shanks are replaced. This happens when the new shanks are being replaced. At that point the saw would need re tensioning which is a in expensive process.
Yes the bits and shanks are standard.
Title: Re: D&L 1224 Commercial 180° SwingBlade - $39,995 USD
Post by: bandmiller2 on March 12, 2019, 06:47:52 PM
D&L tech do you folks do the hammering in house and whats the usual charge. thanks  Frank C.