Sawmill and Timber

Sawmills and Sawing => Mobile Dimension, Swing Mills and other Specialty Mills => Topic started by: Frank Pender - AKA "Tail Gunner" on January 19, 2009, 10:13:20 AM

alt image description alt image description alt image description alt image description alt image description alt image description alt image description alt image description alt image description alt image description alt image description alt image description alt image description alt image description alt image description alt image description
Title: visit last week
Post by: Frank Pender - AKA "Tail Gunner" on January 19, 2009, 10:13:20 AM
I made a visit, last week to the MD factory, East of Portland.   I got to see a new version of my hydraulic mill.  Some major and minor changes will be in the offering.  I understand that they are planning on having the mill ready for the Oregon Logging Conference in February, at the Eugene Fairgrounds.
Title: Re: visit last week
Post by: sawmill_john on January 19, 2009, 06:47:21 PM
So come on Frank you can't just throw out this and not give us some details, what major changes are they doing?   
Title: Re: visit last week
Post by: DaveK on January 19, 2009, 07:09:52 PM
I may have to drive down to check out the equipment displays.  :laugh:
Title: Re: visit last week
Post by: Stevem on January 19, 2009, 09:10:36 PM
Does that mean your goung to do the Show and Tell Frank?
Title: Re: visit last week
Post by: Stephen Wiley on January 19, 2009, 11:15:33 PM
OLC.........

Last time I attended was disappointing.....and was not the only one.

Increase of space cost to vendors.........caused a lack of equipment display and vendors.

Frank, any heads up on how this year's conference exhibitor turnout will be?
Title: Re: visit last week
Post by: Frank Pender - AKA "Tail Gunner" on January 20, 2009, 10:16:20 AM
Well, John, the outrigger supports will be quite different, with a hydraulic cyclinder pushing down to the ground, rather than the other versions of using a turnbuckle system for each outrigger.  There will be no log turning device like mine and the log stops will be much heaver in design along with the log lifts. There is also a chain unloading system for the slabs as well as lumber if you wish. 

Steve Wiley, I have not heard any thing on the issue of fees and the number of participants as vendors.  The last time I was there, the wind was blowing the rain sideways and it was very chilly. 

As to the thought of me helping demo the unit, I am not sure, yet.
Title: Re: visit last week
Post by: Stephen Wiley on January 20, 2009, 03:52:24 PM
Guess I have been out of the circle to long  :o

I thought 'John' worked for MD  ???

Title: Re: visit last week
Post by: Frank Pender - AKA "Tail Gunner" on January 20, 2009, 08:42:44 PM
He left a couple years ago, or more.
Title: Re: visit last week
Post by: sawmill_john on January 21, 2009, 07:11:38 PM
It's coming up on 4 years now, since I've been with Mobile Mfg. Co.  I am now a project manager at an architectural sheet metal company.  I just completed my second high raise condo project in Portland, I'm still learning the business, but I enjoy really getting into it, it's very satisfying to be a part of all the projects I've worked on, my wife ::) will tell you that I drive her crazy pointing out the buildings I've worked on as we drive around town.  So Frank how are the peepers?  When is a good time to come down and see the operation, I'm busy for the next few weekends, cleaning up after the recent wind stom, afew trees went down out at my father-in-laws place.

john
Title: Re: visit last week
Post by: Stephen Wiley on January 21, 2009, 07:52:48 PM
John,

Are those downed trees in Troutdale?

Let me know if you need help.

Title: Re: visit last week
Post by: Frank Pender - AKA "Tail Gunner" on January 21, 2009, 10:20:12 PM
Justd give me a call, John and let me know a couple three days before you want to arrive.
Title: Re: visit last week
Post by: sawmill_john on February 07, 2009, 01:17:11 AM
Frank, so any word on the logging conf., what are the dates of this years show?

Stephen, we're not going to cut up the trees for a while, they are down in the field and not obstructing any thing right now, a good spring time project.

I've still got my mill for sale, I have another guy who's interested, so I might be taking it out and demonstrating it for him, i've now got the trailer reinforced and painted and jack stands installed. 
any one else out there interested?

john
Title: Re: visit last week
Post by: Frank Pender - AKA "Tail Gunner" on February 07, 2009, 08:36:17 AM
I believe the date are Few 19,20 and 21  I do not believe I will be going, at this time.
Title: Re: visit last week
Post by: sawmill_john on February 09, 2009, 12:11:22 AM
Darn, I've got a first aid class on that Saturday, I was thinking about running down there on Saturday, oh well, I think they're missing out on the "Pender" credibility factor, I always felt that having you down there gave such a boost to our presence, it's Mobile's loss, I know you put in some long days, the couple of years you joined me at the conference, that's why I always tried to make it worth you while.

I'm going to fab up the prototype for the engine cover this week, to get the bugs worked out. 
Title: Re: visit last week
Post by: Frank Pender - AKA "Tail Gunner" on February 09, 2009, 08:17:35 AM
Thank you for the compliment, John.   I have not been invited and I did not want to force myself onto them.  I believe that they are planning on having the newly designed trailer and all the new trinkits for the show. 

As to the cover, I have been thinking of something that would come from the side and not over the top.  Then, you could have a door type side that would close.  Just a thought.
Title: Re: visit last week
Post by: Kirk Allen on February 09, 2009, 08:37:01 AM
Frank you need to go!  Of all the people that could use a nice break to visit with friends you are surly at the top of the list!  Take a vacation for at least a day ;D
Title: Re: visit last week
Post by: Frank Pender - AKA "Tail Gunner" on February 09, 2009, 02:10:26 PM
I just got my invite to help demo the new mill trailer and system.   ;D
Title: Re: visit last week
Post by: Kirk Allen on February 09, 2009, 03:08:05 PM
 ;)
Title: Re: visit last week
Post by: sawmill_john on February 19, 2009, 08:21:58 PM
Good deal Frank, you guy's lucked out on the weather, I remember a few of thoses shows, were it was snowing and cold, hope things go well down in Eugene. 

I haven't made the cover yet, works been crazy.

john
Title: Re: visit last week
Post by: Frank Pender - AKA "Tail Gunner" on February 20, 2009, 06:05:29 AM
I told Jim that you might show on Saturday.  Hope to see you down there.