Sawmill and Timber

Business and markets => Wanted => Topic started by: HaroldCR - AKA Fla.-Deadheader on November 12, 2009, 03:32:33 PM

alt image description alt image description alt image description alt image description alt image description alt image description alt image description alt image description alt image description alt image description alt image description alt image description alt image description alt image description alt image description alt image description
Title: Spring Tooth Tiller Springs
Post by: HaroldCR - AKA Fla.-Deadheader on November 12, 2009, 03:32:33 PM

 I need 3-4 Springs from a 3pt. hitch type Tiller, commonly used on 8N-9N Ford or similar tractors. Usually there was 2 springs per tooth, and just popped off the studs that were fastened to the frame and the teeth.

  Thanks