alt image description alt image description alt image description alt image description alt image description alt image description alt image description alt image description alt image description alt image description alt image description alt image description alt image description alt image description alt image description alt image description

Author Topic: Simonds 27 inch saw blades (2)  (Read 7235 times)

Offline farmerscotty

  • New Contributor
  • *
  • Posts: 5
Simonds 27 inch saw blades (2)
« on: January 16, 2017, 01:04:51 PM »
I have 2 Simonds red streak new saw blades.......no sure what they are........27 inch diameter.

Can someone send me the right direction to either sell or figure out what they are.....

Was in the barn in a wooden box....one has surface rust........one doesn't have much.....

KNow they are older....have a big center hole and two smaller holes across from each other.

Scott the farmer in SW Missouri
www.heatbywood.com

Offline Kirk Allen

  • Administrator
  • Old Timers Club
  • *****
  • Posts: 3280
  • In God We Trust!
    • Vindicator Nozzles
Re: Simonds 27 inch saw blades (2)
« Reply #1 on: January 16, 2017, 10:24:12 PM »
can you post some pics of them? 
Integrity is doing the right thing when no one is watching!

Offline Kirk Allen

  • Administrator
  • Old Timers Club
  • *****
  • Posts: 3280
  • In God We Trust!
    • Vindicator Nozzles
Re: Simonds 27 inch saw blades (2)
« Reply #2 on: January 16, 2017, 10:25:04 PM »
I have a Buzz saw that has a blade approximately that size.  I suspect that is what they are from.
Integrity is doing the right thing when no one is watching!

Offline farmerscotty

  • New Contributor
  • *
  • Posts: 5
Re: Simonds 27 inch saw blades (2)
« Reply #3 on: January 18, 2017, 02:19:26 PM »
will take photo's and add them here tonight!
thanks

Offline farmerscotty

  • New Contributor
  • *
  • Posts: 5
Re: Simonds 27 inch saw blades (2)
« Reply #4 on: January 18, 2017, 08:54:40 PM »

Offline farmerscotty

  • New Contributor
  • *
  • Posts: 5
Re: Simonds 27 inch saw blades (2)
« Reply #5 on: January 18, 2017, 08:57:20 PM »
here is some more

Offline farmerscotty

  • New Contributor
  • *
  • Posts: 5
Re: Simonds 27 inch saw blades (2)
« Reply #6 on: January 18, 2017, 09:09:10 PM »
somebody give me an idea of what these are please and what I should ask for them to sell them.

THanks


Offline Stevem

  • Old Timers Club
  • *****
  • Posts: 1103
Re: Simonds 27 inch saw blades (2)
« Reply #7 on: January 24, 2017, 10:22:25 PM »
I can't tell from the pictures but they don't appear to be non-insert toothed so they are IMO really out of date.  You might get some help by contacting Simonds.  They have an 800 number you can get off of the web.

Other than that you might try and find a knife maker and get like $25-$50 (maybe even $10) each because the steel is really good for knife making.  Just my 2 cents.
Stevem
Because you can doesn't mean you should!

Offline bandmiller2

  • Senior Contributor
  • ****
  • Posts: 373
Re: Simonds 27 inch saw blades (2)
« Reply #8 on: January 30, 2017, 06:27:16 AM »
The saws appear to have some hook and were probably designed for industrial gang rip operation. If theirs no hook, that is a straight edge from the tooth face intersects the arbor hole they were for a cordwood "buzz" saw. As suggested call Simonds with the numbers on the saw they should be able to help you. Maybe a close up picture of the teeth would help us. Frank C.