alt image description alt image description alt image description alt image description alt image description alt image description alt image description alt image description alt image description alt image description alt image description alt image description alt image description alt image description alt image description alt image description

Author Topic: Case power unit for a lane no.1  (Read 450 times)

Offline Adampearson07@gmail.com

  • New Contributor
  • *
  • Posts: 5
  • Topics: 1
  • Referrals: 0
Case power unit for a lane no.1
« on: May 23, 2018, 04:45:47 PM »
Hi I just picked up a case 504bdt power unit with a generator head on it. I am told that I need a different flywheel for the hand clutch, and I cannot seem to be able to find one. Can anyone help?

Offline Ox

  • Senior Contributor
  • ****
  • Posts: 504
  • Topics: 16
  • Country: us
  • Trying to learn/remember something new every day.
  • Referrals: 0
Re: Case power unit for a lane no.1
« Reply #1 on: May 24, 2018, 09:30:26 AM »
Have you tried your local AgCo dealer?
K.I.S.S. - Keep It Simple Stupid
Use it up, wear it out, make it do or do without
1989 GMC 3500 4x4 diesel dump and plow truck, 1964 Oliver 1600 Industrial with Parsons loader and backhoe, 1986 Zetor 5211, Cat's Claw sharpener, single tooth setter, homemade Linn Lumber 1900 style mill, old tools

Offline Adampearson07@gmail.com

  • New Contributor
  • *
  • Posts: 5
  • Topics: 1
  • Referrals: 0
Re: Case power unit for a lane no.1
« Reply #2 on: May 24, 2018, 10:28:25 AM »
Hi ox. Yes i be tried all avenues looking for this flywheel..the part number has been discontinued so I've tried some salvage yards with no luck. But thank you

Offline HaroldCR - AKA Fla.-Deadheader

  • Senior Contributor
  • ****
  • Posts: 969
  • Topics: 69
  • Referrals: 0
Re: Case power unit for a lane no.1
« Reply #3 on: May 24, 2018, 11:43:54 AM »
Have you tried old tractor-engine forums ? Several of these on the 'net.

Offline Adampearson07@gmail.com

  • New Contributor
  • *
  • Posts: 5
  • Topics: 1
  • Referrals: 0
Re: Case power unit for a lane no.1
« Reply #4 on: May 24, 2018, 11:53:55 AM »
Yes i have. apparently a tractor flywheel is different

Offline Crusarius

  • Causing trouble and breaking shit
  • Contributor
  • **
  • Posts: 35
  • Topics: 2
  • Country: us
  • Hmm what does this button d....
  • Referrals: 0
    • RockModified
Re: Case power unit for a lane no.1
« Reply #5 on: May 24, 2018, 11:57:44 AM »
any idea what is so different about it? Something that can be adapted?

Offline Adampearson07@gmail.com

  • New Contributor
  • *
  • Posts: 5
  • Topics: 1
  • Referrals: 0
Re: Case power unit for a lane no.1
« Reply #6 on: May 24, 2018, 12:00:50 PM »
I've been told that it needs to be thicker and have a taper to it. I d
Dont have alot of experience with this type of thing

Offline Crusarius

  • Causing trouble and breaking shit
  • Contributor
  • **
  • Posts: 35
  • Topics: 2
  • Country: us
  • Hmm what does this button d....
  • Referrals: 0
    • RockModified
Re: Case power unit for a lane no.1
« Reply #7 on: May 24, 2018, 12:54:37 PM »
thicker is easy. Taper not so easy.

Offline bandmiller2

  • Senior Contributor
  • ****
  • Posts: 293
  • Topics: 30
  • Referrals: 0
Re: Case power unit for a lane no.1
« Reply #8 on: May 24, 2018, 06:14:56 PM »
Adam, is the generator three phase and usable.? If so put the engine in a shed a ways from the mill and run the mill with an electric motor. Its nice to be able to talk to your help and just hear the saw. Frank C.

Offline Adampearson07@gmail.com

  • New Contributor
  • *
  • Posts: 5
  • Topics: 1
  • Referrals: 0
Re: Case power unit for a lane no.1
« Reply #9 on: May 24, 2018, 09:16:14 PM »
Hey Frank.  Yes it is 3 phase and usable. I have thought about doing that, but this mill is my father's baby and he is very hard to convince to do this for some reason but thanks for the advice