alt image description alt image description alt image description alt image description alt image description alt image description alt image description alt image description alt image description alt image description alt image description alt image description alt image description alt image description alt image description alt image description

Author Topic: Winters coming  (Read 413 times)

Offline mountainlake

  • Senior Contributor
  • ****
  • Posts: 203
  • Topics: 20
  • Referrals: 1
Winters coming
« on: November 07, 2018, 05:52:57 AM »
 
 Snow on the ground, highs in the mid 20's, lows 10 to 15F. Time to switch over to diesel for lube. I've been running the same v belts since last spring so I put new ones on yesterday as they have to be in good shape when running diesel or they slip off when engaging the engine. One was tough, the other not too bad, seem like some are just a hair smaller. For the first time since 2002 I left the mill in the shed, the skid loader will be in there soon and it will be kicked out.  Steve.

Offline Ox

  • Senior Contributor
  • ****
  • Posts: 526
  • Topics: 16
  • Country: us
  • Trying to learn/remember something new every day.
  • Referrals: 0
Re: Winters coming
« Reply #1 on: November 07, 2018, 09:01:36 AM »
*sigh*

How depressing.  I hate winter these days.  On top of winter coming, we've had a perpetual mud season since early summer.  Our ground hasn't dried out for over 5 months.  In my 40+ years living here it's never been this bad.  Ever.  Of course I don't remember much being a young kid but records are there to search.  I'm so glad I'm not still farming because hay this year was impossible, corn needed chopping last month and there just ain't no way.  Well, maybe one way.  2 tractors chained together with double ring tire chains on.  Our soil is clay and as such turns to grease when wet.  Not to mention being on a mountain with everything on a slope. 

No thanks. 
K.I.S.S. - Keep It Simple Stupid
Use it up, wear it out, make it do or do without
1989 GMC 3500 4x4 diesel dump and plow truck, 1964 Oliver 1600 Industrial with Parsons loader and backhoe, 1986 Zetor 5211, Cat's Claw sharpener, single tooth setter, homemade Linn Lumber 1900 style mill, old tools

Offline Kojba

  • Major Contributor
  • ***
  • Posts: 98
  • Topics: 12
  • Country: us
  • Referrals: 0
Re: Winters coming
« Reply #2 on: November 07, 2018, 08:44:35 PM »

 Snow on the ground, highs in the mid 20's, lows 10 to 15F. Time to switch over to diesel for lube. I've been running the same v belts since last spring so I put new ones on yesterday as they have to be in good shape when running diesel or they slip off when engaging the engine. One was tough, the other not too bad, seem like some are just a hair smaller. For the first time since 2002 I left the mill in the shed, the skid loader will be in there soon and it will be kicked out.  Steve.

High of 58 tomorrow, dropping down to a mid 40 something later this Saturday.  Virginia weather ain't that bad... ;D   I do like the occasional snow, but my arthritis doesn't seem to like it at all.  I'd love to live a little farther north, but the wife won't hear talk of it.  She wants to move to Georgia where our daughter lives; but if she moves, she'll move alone!  LOL  I can't take the heat and humidity of Georgia, it's bad enough around here! :o   
Keep Ole Joe Boy Alive
or
Kiss Ole Joe Boy's Ass

Offline bandmiller2

  • Senior Contributor
  • ****
  • Posts: 303
  • Topics: 31
  • Referrals: 0
Re: Winters coming
« Reply #3 on: November 08, 2018, 06:02:09 AM »
This is a good time to roam around your diggens and pick up tools and other stuff that will disappear under a blanket of white. If this winter is as wet as this summer we're in a world of poop. Back in the eighties I had a circular mill setup in the woods with a 40' roof and covered dead deck. I could keep many logs under cover. Nothing worse than ice covered logs. Frank C.

Offline mountainlake

  • Senior Contributor
  • ****
  • Posts: 203
  • Topics: 20
  • Referrals: 1
Re: Winters coming
« Reply #4 on: November 09, 2018, 10:32:47 AM »
 
 I had a saw job scheduled for today, 11f with a high of 20f which would be fine but with a 19MPH wind out in the open it got put off until next week.  Steve

Offline bandmiller2

  • Senior Contributor
  • ****
  • Posts: 303
  • Topics: 31
  • Referrals: 0
Re: Winters coming
« Reply #5 on: November 09, 2018, 04:01:14 PM »
Steve, I hear you if a fella has to work its one thing if you have the option to wait for better conditions that the wise thing to do. Cold is not only hard on sawyers but its tough on equipment. Frank C.

Offline Kojba

  • Major Contributor
  • ***
  • Posts: 98
  • Topics: 12
  • Country: us
  • Referrals: 0
Re: Winters coming
« Reply #6 on: November 09, 2018, 08:09:37 PM »
Mountain lake, how far north are you?  Sounds like Canadian weather!  I'd love be north during the summer months, but you've got me thinking about the harsh winters now... :o
Keep Ole Joe Boy Alive
or
Kiss Ole Joe Boy's Ass

Offline mountainlake

  • Senior Contributor
  • ****
  • Posts: 203
  • Topics: 20
  • Referrals: 1
Re: Winters coming
« Reply #7 on: November 10, 2018, 03:56:12 AM »

 I'm right in the middle of MN,  It's 4 f this morning.   Steve

Offline red oaks lumber

  • Major Contributor
  • ***
  • Posts: 123
  • Topics: 6
  • Referrals: 1
Re: Winters coming
« Reply #8 on: November 11, 2018, 10:06:11 AM »
northern wisconsin here.. 10f this morning and close to 6" of snow on the ground.  the only bright spot of winter, no bugs and no tourists!!
follow your heart, the rest will happen

Offline Kojba

  • Major Contributor
  • ***
  • Posts: 98
  • Topics: 12
  • Country: us
  • Referrals: 0
Re: Winters coming
« Reply #9 on: November 11, 2018, 02:55:23 PM »
Just came in from cutting a load of white oak firewood.  It's getting down in the 30's a night this week, and my wife is freaking out!  I told her, she needs to read some this thread, and learn what cold is all about.  We get snow when 31 degrees mixes with some wet weather.  Anything colder, and there usually is no precipitation.  The problem with 40 degree days, is I start with a jacket on, and then get down to a long sleeve shirt while working.  Jacket on, jacket off.  Most of my coats have broken zippers.... problems below the Mason Dixon line I guess.... :o

Kojba
Keep Ole Joe Boy Alive
or
Kiss Ole Joe Boy's Ass

Offline Banjo picker

  • New Contributor
  • *
  • Posts: 10
  • Topics: 0
  • Referrals: 0
Re: Winters coming
« Reply #10 on: November 12, 2018, 01:34:22 PM »
Its raining here in Miss. today .  I delivered a load of lumber to a customer this morning.  As for cold ....nope, we have had a killing frost a couple days ago.  Found out my heater core has to be replaced...when I turned on the defrost to clear my windshield.   That should be fun.  Banjo

Offline Ox

  • Senior Contributor
  • ****
  • Posts: 526
  • Topics: 16
  • Country: us
  • Trying to learn/remember something new every day.
  • Referrals: 0
Re: Winters coming
« Reply #11 on: November 13, 2018, 10:58:41 AM »
I would drop in some Bar's Leaks pellets before tearing into any heater core in a vehicle built after 1995 or so... I've heard horror stories of hours and hours of work and entire dashboards having to be torn apart.  I know lots of folks scoff at the Bars Leaks pellets but I've had excellent luck with them and it's saved me tons of headaches and money.  Seems to be basically a permanent thing and I've never had any reduction in heater output or cooling efficiency.  I've got that stuff still working in one of the cars and it's been over 5 years now.  I put some in everything because it's got conditioners in for the coolant as well, and having that small stuff constantly floating around ready to plug a leak is priceless to me.  Whatever the case, I wish you luck with your heater core problem. 

On a separate note, we've got several new inches of the devil's cocaine on the ground.  The ground is officially covered and I'm officially puckered up about it.  I hate it here.

Just 5 more years, if nothing major goes wrong in our lives, and we'll be able to move the hell outta here and get south of the Mason Dixon to one of the "racist, dumb, deplorable" free states.  My kind of folks!  If the media knocks them, I'm gonna like them.
K.I.S.S. - Keep It Simple Stupid
Use it up, wear it out, make it do or do without
1989 GMC 3500 4x4 diesel dump and plow truck, 1964 Oliver 1600 Industrial with Parsons loader and backhoe, 1986 Zetor 5211, Cat's Claw sharpener, single tooth setter, homemade Linn Lumber 1900 style mill, old tools

Offline Kojba

  • Major Contributor
  • ***
  • Posts: 98
  • Topics: 12
  • Country: us
  • Referrals: 0
Re: Winters coming
« Reply #12 on: November 13, 2018, 11:34:48 AM »


Just 5 more years, if nothing major goes wrong in our lives, and we'll be able to move the hell outta here and get south of the Mason Dixon to one of the "racist, dumb, deplorable" free states.  My kind of folks!  If the media knocks them, I'm gonna like them.

You're welcome here!  Virginia is slowly turning Demorat, but there are still great places in the country, where people get along just fine, regardless of race or religion.  No matter what the media says, country people are the best...
Keep Ole Joe Boy Alive
or
Kiss Ole Joe Boy's Ass

Offline Ox

  • Senior Contributor
  • ****
  • Posts: 526
  • Topics: 16
  • Country: us
  • Trying to learn/remember something new every day.
  • Referrals: 0
Re: Winters coming
« Reply #13 on: November 13, 2018, 02:52:49 PM »
Country people ARE the best.  I think the country's divided like this:  city folk and country folk.  Not much in between, really.  City folk seem to be liberal, country folk seem to be conservative.  Of course there are always exceptions to every rule. 

It's a shame I have to put that last sentence on, but you know how some people can be - they'll point out one exception out of millions to try to prove you wrong - figured I'd save some grief.  :laugh:
K.I.S.S. - Keep It Simple Stupid
Use it up, wear it out, make it do or do without
1989 GMC 3500 4x4 diesel dump and plow truck, 1964 Oliver 1600 Industrial with Parsons loader and backhoe, 1986 Zetor 5211, Cat's Claw sharpener, single tooth setter, homemade Linn Lumber 1900 style mill, old tools

Offline mountainlake

  • Senior Contributor
  • ****
  • Posts: 203
  • Topics: 20
  • Referrals: 1
Re: Winters coming
« Reply #14 on: November 13, 2018, 04:02:28 PM »

 That's not city folk, its city slickers.  Steve

Offline Ox

  • Senior Contributor
  • ****
  • Posts: 526
  • Topics: 16
  • Country: us
  • Trying to learn/remember something new every day.
  • Referrals: 0
Re: Winters coming
« Reply #15 on: November 13, 2018, 05:29:08 PM »
What's the difference?  ???
K.I.S.S. - Keep It Simple Stupid
Use it up, wear it out, make it do or do without
1989 GMC 3500 4x4 diesel dump and plow truck, 1964 Oliver 1600 Industrial with Parsons loader and backhoe, 1986 Zetor 5211, Cat's Claw sharpener, single tooth setter, homemade Linn Lumber 1900 style mill, old tools

Offline Kojba

  • Major Contributor
  • ***
  • Posts: 98
  • Topics: 12
  • Country: us
  • Referrals: 0
Re: Winters coming
« Reply #16 on: November 14, 2018, 07:06:04 PM »
What's the difference?  ???

Not sure about he city slicker, city folk thing, but Jimmy Carter's brother was once asked to explain the difference between a "Redneck" and a "Country Boy".  Ole Billy just grinned and said "A Country Boy throws his beer cans in the back of his pick-up, and a Redneck just tosses them out on the side of the road".   I guess the difference between "City Folk" and a "City Slicker" is the way they throw out their wine bottles.  City slickers recycle, and City folk just toss them in a trash can... :o
Keep Ole Joe Boy Alive
or
Kiss Ole Joe Boy's Ass

Offline Ox

  • Senior Contributor
  • ****
  • Posts: 526
  • Topics: 16
  • Country: us
  • Trying to learn/remember something new every day.
  • Referrals: 0
Re: Winters coming
« Reply #17 on: November 15, 2018, 08:52:51 AM »
lol  good 'nuff explanation for me!
K.I.S.S. - Keep It Simple Stupid
Use it up, wear it out, make it do or do without
1989 GMC 3500 4x4 diesel dump and plow truck, 1964 Oliver 1600 Industrial with Parsons loader and backhoe, 1986 Zetor 5211, Cat's Claw sharpener, single tooth setter, homemade Linn Lumber 1900 style mill, old tools