Good evening all,
I started this sawmill idea with the thought, that I'd get / buy a sawmill to prepare
wood / logs into blanks for use on the wood lathe.
As I started to research the makers / manufacturers of sawmills, I looked at Hud-son,
Cook's, Logmaster, Timberking, Norwood, I found that not all sawmills are made / look
the same.
In looking at the various models available, work neatness wasn't equal, ie saftey chains
& gears not covered, movement of various things, up / down, side to side, ect.
To shorten the story a little, I've narrowed the selection down to the 1220 sawmill made
by Timberking and the Lumbermate MX24 made by Norwood.
I set up excell spreadsheets, ran / compared the numbers, they come out about even.
So my question to the peanut gallery is, your opinion on the last two standing, if you
will, that being Timberking and Norwood. Good or not so good.
Thanks for your time this evening.
Robert Sherwood