Sawmill and Timber

Chainsaws and light support equipment => Chain Saws => Topic started by: bandmiller2 on April 09, 2016, 07:44:13 PM

alt image description alt image description alt image description alt image description alt image description alt image description alt image description alt image description alt image description alt image description alt image description alt image description alt image description alt image description alt image description alt image description
Title: Handy tip
Post by: bandmiller2 on April 09, 2016, 07:44:13 PM
Back when I was a somewhat usefull citizen I was the lone mechanic for a medium sized fire dept. Had to maintain everything, with many two and four cycle small engines. I mixed the gas mix and renewed it each month. I was always nervous the lads would put straight gas in the saws as we carried both on the trucks. Devised a plan I would mix a little synthetic two cycle oil with the straight gas when they weren't looking used Amsoil at 100/1, if they made a mistake no harm done. The mix did nothing but good for the air cooled four cycle engines too. Frank C.